toll free 888-463-3772
|
Indicated below are the steps for loading
the incense powder into the burners.
Step 1 - Load Burner With Incense Powder
Place burner in the center of shipping
box or on a smooth protected surface such as a piece of paper.
Pour an ample amount of powder into center of the burner.
Warning
Do NOT allow any incense to touch any
varnished, painted or plastic surfaces.
Keep powder out of reach of children and
pets
Not for human consumption
Step 2 - Level Incense Powder
Moving the tamp in a circular motion,
starting in the center and working outward, gently fill the
grooves of the burner with the incense powder. DO NOT PACK the
powder. Let the powder fall naturally into the grooves.
When you have filled the burner, take the
excess powder that has fallen from the sides of the burner and
store in the plastic bag.
Step 3 - Light The Incense Powder
Using a blunt ended item such as the end
of the ash removal brush or a match, lift up a very small
amount of the powder to form a mound (wick). Light the mound of
powder with a match or lighter. The powder will continue to
burn.
Step 4 - Stopping The Incense Powder From
Burning
A unique feature of the incense powder is
the capability of starting and stopping the burn. To stop
the burning of the powder, make a separation in the powder just
in front of the burn. The powder should stop at this point. To
restart, refer back to Step 3.
Step 5 - Cleaning The Ashes From The Burner
To remove the ashes, use EXTREME CAUTION
to make sure there is no powder burning. Allow 10-20
minutes (minimum) for the ashes to cool prior to brushing them
out. Use the small brush to remove all the ashes and residue
from the burner. The sink is an excellent place to clean the
burner. It should eliminate the possibility of fire and the
mess can be flushed down the drain. Do NOT hit/tap the
burner against the edge of container you are emptying the ashes
into and do not get the burner wet.
Sweet Rock - 518 Hodge Street - Newport, KY
41071-1531
tele (859) 581-9407 toll free (888)
463-3772 (888) go-ferra fax (859) 291-7300
Sweet Rock®, FerraStone®,
Azenta®, GridStone® and Burner Havens® are all
registered names with the US Trademark/Patent Office
Copyright 2005 Sweet Rock - All Rights
Reserved - Information Subject To Change Without Notice
